Sample Torque Specifications

ENGINE
ITEM	N-m	lb-ft
Cylinder head cover bolt	**	.
Camshaft sprocket bolt	**	.
Cylinder head nut * mm Diam.	**	*.
Cylinder head nut * mm Diam.	**	.
Cylinder base nut	**	.
Starter clutch securing bolt	**	*.
Cam drive chain tension adjuster bolt	*	.
Generator rotor nut	**	*.
Generator rotor nut (**** and newer)	**	*.
Crankcase bolt	**	.
Primary drive gear nut	**	*.
Clutch cover bolt and generator cover bolt	**	.
Starter motor lead wire connecting bolt	.	.
Starter motor mounting bolt	**	.
Clutch sleeve hub nut	**	*.
Gearshift arm stopper	**	*.
Engine oil drain plug	**	*.
Oil filter cap nut and oil sump filter cap bolt	*	.
Engine sprocket bolt	**	*.
Engine mounting bolt (Top side)	**	*.
Engine mounting bolt (Front side)	**	*.
Engine mounting bolt (Rear side)	**	.
Engine mounting bracket bolt	**	*.
Exhaust pipe nut	**	*.
Muffler connection bolt	**	*.
Muffler mounting bolt (Front side)	**	*.
Muffler mounting bolt (Rear side)	**	*.
CHASSIS
ITEM	N-m	lb-ft
Front axle nut	**	*.
Front fork damper rod bolt	**	*.
Front fork lower clamp bolt	**	*.
Front fork upper clamp bolt	**	*.
Steering stem head nut	**	*.
Handlebar clamp bolt	**	*.
Handlebar holder nut	**	*.
Front brake master cylinder mounting bolt	**	.
Front brake caliper mounting bolt	**	*.
Front brake pad mounting bolt	**	*.
Front brake caliper axle bolt	**	*.
Front brake hose union bolt	**	*.
Air bleeder valve	*	.
Front brake disc bolt	**	*.
Front footrest nut	**	*.
Swingarm pivot nut	**	*.
Front footrest bolt	**	*.
Rear torque link nut	**	.
Rear shock absorber nut (Upper & Lower)	**	*.
Rear cushion lever center nut	**	*.
Rear cushion lever nut	**	*.
Rear axle nut	**	*.
Rear sprocket bolt	**	*.
Rear brake cam lever bolt	**	.
Rear brake pedal nut	**	.
Spoke nipple	.	.

Note: Sample Data - Numbers replaced by * symbol. All Cyclepedia Press LLC manuals include complete specifications.

General Torque Specifications

General torque specifications are only to be used when specific torque specifications for a fastener are not provided. These specifications are for clean unlubricated threads.

Bolt Diameter (Threads)	Conventional or marked '*'		Marked '*'
(mm)	N-m	lb-ft	N-m	lb-ft
*	.	.	.	.
*	*	.	.	.
*	.	.	**	.
*	**	.	**	*.
**	**	*.	**	*.
**	**	*.	**	*.
**	**	*.	***	*.
**	***	*.	***	**.
**	***	**.	***	**.

This is an abridged sample manual from Cyclepedia Press LLC.

See more at - http://www.cyclepedia.com/online-manuals/

Note: If you are viewing this document offline be sure to visit the latest version online at http://www.cyclepedia.com before attempting any repairs. Updates are made without notice.